Hp deskjet not printing anything

Hp deskjet not printing anything DEFAULT

Full cartridge but ink not printing.

Guide to fix Full cartridge but ink not printing.

step 1 :- Use genuine original ink cartridges.

step 2 :- Check the estimated ink level.Then replace any low or empty cartilages.

Key Point :- a. Ink level warning provides estimates for planning purpose only. you do not need to replace cartridges until print quality become poor.

b. If non of the cartridges are below ink need not to replace them .

step 3:- Use the automated tool to clean the print head.

# The printer must be power on.

# Touch the dash icon on the lower left of the control panel.

  1. Touch the right arrow to scroll the tools then press OK.
  2. Scroll to clean print head. Then press OK.
  3. The printer beginning to clean the print head.
  4. The printer make noises during cleaning process .
  5. Print a test page.
  6. If you find a defect in the printed piece of paper, you need to repeat the process several times.

Was this answer helpful?


Voted Undo



Sours: https://www.ifixit.com/Answers/View/255068/Full+cartridge+but+ink+not+printing.

HP Printer Won’t Print

“HP printer won’t print” is a very common issue that can result from many different reasons.

  • missing or out-of-date drivers
  • faulty connections
  • bad configurations in Windows
  • and more

Even simple things like having no ink or a having paper jam can cause frustration with any printer, like your HP printer!

Below are a few solutions you may want to walk through in order to try to fix your HP printer issues.

Try This Time-Saving Shortcut
Start using Driver Support | ONE today and save time and frustration dealing with common Windows device issues. The software will inventory your computer for all active device types we support upon installation. When fully registered the service will update drivers for you automatically.
Download Driver Support


SOLUTION 1: Check HP Printer Status

Let’s start with the easy and obvious stuff first

1) Make sure your HP printer has enough paper in the paper tray. If there is paper then make sure none of it is stuck or jammed in the paper feed. If there is please check with your manufacturer on the best way to remove the paper as you don’t want to ruin the internal motor or paper feeder.

2) Is your ink or toner empty? Consult your specific printer’s manual for how to check the ink levels or toner level for your printer. New HP printers will easily display the ink levels or if there is an ink issue on the front screen of the HP printer.

If you need to have your HP printer serviced you may need to contact HP directly via customer support.

SOLUTION 2: Cancel all HP Printer Jobs

Clear out stalled print jobs on your HP Printer

This is a bit more technical but not too advanced that you can’t give it a try. Many times during the life of an HP printer, jobs that you send to it for printing can become stuck in the print queue.

If the job in question stays in the print queue it can stop all other printing from occurring normally on your HP printer. In this case, clearing the print queue of all jobs might help get the newer print requests to go through just fine. Let’s begin!

1. Go to your Windows Control Panel and select “Devices and Printers”

Your control panel can be reached by typing “Control Panel” in the search bar on Windows 10 or in older versions of windows press Window logo key and “R” key on your keyboard at the same time to open the Run dialog. In this dialog, type “control” and hit Enter. This will open Control Panel in most Windows operating systems.

2. Find your HP Printer in the list of printing devices, make sure its the one your are having issues with. Right click on that printer and select “See what’s printing” from the drop down list.

3. When the new page opens click the “Printer” menu item in the top right and select “Open as Administrator” in the drop-down menu

4. Open the “Printer” menu item in the top right AGAIN and select “Cancel All Documents”.  At this time a confirmation dialog window may open and you will need to confirm you want to clear all documents in the print queue by selecting “Yes”

Now try running a print again on that HP printer to see if that was the issue.  If that didn’t work please try the next steps.

SOLUTION 3: Set Your HP Printer As Default Printer

Are you sending your print jobs to the wrong printer? Let’s check!

Usually when you send a print request Windows will send that print job to what is called the default printer. If your printer is all hooked up but nothing is printing it could be that your HP Printer is not set to default in Windows.

So all your printing requests are not going to your printer but into a blank void of no return. Let’s check that and make sure your HP is Default Printer.

1. Go to your Windows Control Panel and select “Devices and Printers”

Your control panel can be reached by typing “Control Panel” in the search bar on Windows 10 or in older versions of windows press Window logo key and “R” key on your keyboard at the same time to open the Run dialog. In this dialog, type “control” and hit Enter. This will open Control Panel in most Windows operating systems.

2. Find your HP Printer in the list of printing devices, make sure its the one you are having issues with. Right click on that printer and select “Set as default printer” from the drop-down menu. If there is a confirmation prompt please make sure you click “Yes”.

You should now see a nice little green check mark below the icon of your HP printer, this means its now the default printer for Windows.

Go give your printing a try to see if that helped you!

SOLUTION 4: HP Printer Troubleshooting

So, ummmm. Are the lights on and is it plugged in? 

It doesn’t hurt to ask. There are some really easy troubleshooting items you can do to make sure you can print to your HP printer if it stops working or has never worked.

First, check the connection cables from the wall power to the HP printer power connector. Then, check the cabling from your printer to the Windows PC it might be connected too, is the USB cable firmly in place on both ends?

If there is a network cable running to the HP printer for HP network printing make sure that Ethernet cable is snug and check your manual to see if there should be lights blinking to indicate a network connection.

Are there lights on at the front of your HP printer? If they are not and the printer doesn’t look to be powered on, try unplugging it and plugging it back in. Then make sure you press the power on button on the printer itself.  If the light still don’t come on maybe try another power plug in your home just in case that outlet is out.

If nothing works and your printer just won’t power on, then you may need to take it to a service center or contact HP support directly for hardware assistance.

Solution 5: Update HP Printer Driver (Recommended)

If above two methods don’t work for you; or if you don’t have the patience, time, or computer skills, to update/fix manually it is possible to do it automatically with Driver Support.

Automatically update HP Print Drivers  (Recommended)

Driver Support will scan your computer to detect any problem drivers on your computer. You don’t need to know what operating system your computer is running. It is possible to update the HP Drivers automatically with the  Premium version of Driver Support. If you want to do this manually see our guide here How To: HP Printer Driver Solutions for Windows

1. Download Driver Support and Install Driver Support FREE TRIAL

2. Let the software run the free scan for you to detect all your driver problems and any other optimization opportunities

3. Click the “FIX IT” button and register Driver Support to get started updating your drivers for printing devices on your computer

4. Once Registered and in Premium mode the software will walk you through the entire process, plus with your registration, you will receive unlimited tech support with our Driver Support Signature Service! Just call us toll-free after registration.

Sours: https://www.driversupport.com/knowledge-article/hp-printer-wont-print/
  1. Yellow bath sheet towels
  2. How to get free stuff
  3. Cdl practice test arizona

HP Printer Not Printing [SOLVED]

Printer won’t print is a common issue for HP printer users. This issue can result from various reasons, from connectivity issues to faulty configurations or drivers. If you are struggling to find a good fix, you can give the methods as follows a try. They can help you fix your HP printer won’t print problem.

1) Perform basic troubleshooting

2) Update printer driver

3) Set your printer as default

4) Cancel all print jobs

5) Check printer status

1) Perform basic troubleshooting

You can do some troubleshooting at first when you find your HP printer stops working. You should check the status of the connection between your printer and your computer. Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal.

You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer. See if your printer can print as normally as before.

2) Update or reinstall printer driver

In many cases, printer won’t print issue comes from faulty drivers. You may need to update or reinstall printer driver to fix your HP printer not printing issue.

One easy and credible way to deal with drivers is to use Driver Easy.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can download and install your drivers by using either Free or Pro version of Driver Easy. But with the Pro version it takes only 2 clicks (and you get full support and a 30-day money back guarantee):

a) Download and Install Driver Easy.

b) Run Driver Easy and hit Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

c) Click on the Update button next to your HP printer to download the latest and correct driver for this device. You can also hit Update All button at the bottom right to automatically update all outdated or missing drivers on your computer (this requires the Pro version — you will be prompted to upgrade when you click on Update All).

Apart from updating driver, you can also use Driver Easy to uninstall driver (also Pro required). This is helpful especially when you want to reinstall the driver of a device. 

a) Open Driver Easy and select Tools.

b) Select Driver Uninstall and you will see a list of device drivers. Locate your HP printer driver and then click on the Uninstall button. The driver you select will be removed soon.

3) Set your printer as default

When you are trying to print something, your computer will automatically assign these printing tasks to default printer unless you choose another one on purpose. So your HP printer won’t do its job if you neither set it as default printer nor select it as the printer to print.

If you want to set your HP printer as default, please follow the steps below.

a) Press Window logo key and R key on your keyboard at the same time to open Run dialog. In this dialog, type “control” and hit Enter. This will open Control Panel.

b) In Control Panel select Devices and Printers.

c) In Printers section, right click on your HP printer and then select Set as default printer. Click on Yes if prompted.

d) There is now a tick below the icon of your HP printer. That means it is now set as default printer.

4) Cancel all print jobs

Another possible cause of your HP printer not printing issue is the stuck print queue. The print queue containing failed print jobs can stop functioning normally and lead to printer not printing issue. You can clear all print jobs to get your HP printer back to normal.

a) Open Devices and Printers in Control Panel. (You can refer to the steps a and b in the method above.)

b) Right click on your HP printer in Printers section and select See what’s printing.

c) Open Printer menu and then select Open As Administrator.

d) Open Printer menu again. This time select Cancel All Documents.

e) Confirm your action.

f) You have cancelled all print jobs of your printer. Now check and see if it can run normally.

5) Check printer status

If you have tried the methods above and your HP printer still cannot print, you may need to check if there are hardware issues on your printer.

You need to ensure your HP printer has enoughpaper, ink or toner, and it is not stuck on paper jam. Also check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases your HP printer stops printing after you replace its parts. If this happens you should install the original ones back and see if the problem resolves.

You can also have your printer serviced. Contact HP customer support for further assistance or get your printer repaired or replaced.


143 people found this helpful

Sours: https://www.drivereasy.com/knowledge/hp-printer-wont-print-solved/
Resolving Issues That Cause Blank Scans or Copies - HP Printers - @HPSupport


Deskjet printing hp anything not


Hp deskjet 2131 printer prints blank pages - hp 2130 not printing after refill - problem solved


Similar news:


429 430 431 432 433