10g switch cisco

10g switch cisco DEFAULT

Cisco SG350XG-24F 24-Port 10G SFP+ Stackable Managed Switch

  • Data Sheets and Product Information

  • Release and Compatibility

    • Release Notes

      • Open Source Document for Cisco_250_350_350X_and_550X_Series_Switches_2.5.5_x 03-Jun-2020(PDF - 1 MB)
      • Open Source Used In 250, 350, 350X, and 550X Series Switches 2.4.5.x 28-Nov-2018(PDF - 1 MB)
      • Open Source Used In Cisco 350XG and 550XG Series Switches Firmware Version 2.0.0.x 26-Oct-2015(PDF - 882 KB)
      • Open Source Used In Cisco 250, 350, 350X and 550X Series Switches 2.4.0.x. 03-Jul-2018(PDF - 933 KB)
      • Open Source Used In Cisco 250, 350, 350X and 550X Series Switches Firmware Version 2.3.0.x 28-Jun-2017(PDF - 994 KB)
      • Open Source Used In Cisco Sx10G Series Switches 1.4.9.x 07-Nov-2018(PDF - 808 KB)
      • Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/ 550XG, SX350X, SX550X Series Switches up to Software Version 2.5.8.12 03-Sep-2021(PDF - 331 KB)
      • Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/ 550XG, SX350X, SX550X Series Switches up to Software Version 2.5.7.85 05-Mar-2021(PDF - 313 KB)
  • Reference

  • Licensing Information

  • Design

  • Install and Upgrade

  • Configuration

  • Maintain and Operate

  • Troubleshooting

    • Troubleshooting TechNotes

      Most Recent

      • Diagnose Link Flapping on a Switch 03-May-2021
      • Smartport Best Practices for Sx250, Sx350, SG350X, and Sx550X Series Switches 01-Mar-2021
      • Troubleshoot Smartports on your Sx250, Sx350, SG350X, or Sx550X Series Switch 28-Jan-2021
      • Cannot Add a New Switch to an Existing Stack 28-Sep-2020
      • Tips to Keep the ARP Table Available for DHCP IP Addressing 08-Aug-2019
      • SG350X, Sx550X: RSPAN Mirrored Packet Loss when Forwarding 12-Dec-2018
      • SG350XG, Sx550X: The Switch Does Not Recognize a USB Flash Drive 12-Dec-2018
      • SG350X: Running Cable Test Via The "Test Cable-Diagnostics Tdr" Command May Provide Unpredictable Results 12-Dec-2018
      • SG350XG: Device Does Not Join the Stack After Reload when Changing from Set ID to Auto Unit ID 12-Dec-2018
      • SG350X, Sx550X: Unable to Change XG Port Settings on a Switch 12-Dec-2018
      • SG350X, SG550XG: Stack Slave Stuck when Unit is Disconnected then Reconnected 12-Dec-2018
      • SG350X: Egress Traffic Shaping on XG Device Uplink Interfaces Limits Traffic to 80 Kbps 12-Dec-2018
      • SG350X: The 6to4 Tunnel Traffic is not Forwarded in Line Rate 12-Dec-2018
      • Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports 12-Dec-2018
      • SG350XG: Show Queue Statistics Command May Display Incorrect Information 12-Dec-2018
    • View all documentation of this type
  • Literature

  • Translated Documents

    • Translated End-User Guides

      • Cisco 350 Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Portuguese) 18-Dec-2017(PDF - 942 KB)
      • Cisco 350 Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Russian) 18-Dec-2017(PDF - 1 MB)
      • Cisco 350, 350X and 550X Series Managed Switches Administration Guide, Firmware Release 2.4 - French 04-Jul-2018(PDF - 13 MB)
      • Cisco 350, 350X and 550X Series Managed Switches Administration Guide, Firmware Release 2.4 - Japanese 04-Jul-2018(PDF - 13 MB)
      • Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (French) 18-Dec-2017(PDF - 945 KB)
      • Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (German) 18-Dec-2017(PDF - 944 KB)
      • Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Italian) 18-Dec-2017(PDF - 936 KB)
      • Cisco 350X Series Managed Switches Quick Start Guide, Firmware Release 2.3.x (Spanish) 18-Dec-2017(PDF - 943 KB)
      • Cisco 350X Series Stackable Managed Switches Quick Start Guide (Multilingual) 29-Mar-2017(PDF - 3 MB)
      • Cisco 350X Series Stackable Managed Switches Quick Start Guide (Trilingual) 29-Mar-2017(PDF - 1 MB)
  • Sours: https://www.cisco.com/c/en/us/support/switches/sg350xg-24f-24-port-ten-gigabit-sfp-plus-switch/model.html

    Cisco SG350XG-24T

    Cisco 350X Series Specifications Switching capacity and forwarding rate
    All switches are wire-speed and nonblocking
    Product NameCapacity in mpps
    (64-byte packets)
    Switching Capacity (Gbps)SG350X-8PMD29.76 80SG350X-2495.23128SG350X-24P95.23128SG350X-24MP95.23128SG350X-24PD 104.16 140SG350X-48130.94176SG350X-48P130.94176SG350X-48MP130.94176SG350XG-2F10178.56 240 SG350XG-24F357.12 480SG350XG-24T357.12 480SG350XG-48T714.24960SX350X-08119.05160SX350X-12178.56240SX350X-24F357.12480SX350X-24357.12480SX350X-52755.811040Spanning Tree Protocol
    • Standard 802.1d spanning tree support
    • Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
    • Multiple spanning tree instances using 802.1s (MSTP); 16 instances are supported
    Port grouping/link aggregation
    • Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
      • Up to 8 groups
      • Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad LAG
    VLAN
    • Support for up to 4094 active VLANs simultaneously; port-based and 802.1Q tag-based VLANs; MAC-based VLAN
    • Management VLAN
    • Private VLAN with promiscuous, isolated, and community port
    • Guest VLAN, unauthenticated VLAN, protocol-based VLAN, subnet-based VLAN, CPE VLAN
    • Dynamic VLAN assignment using RADIUS server along with 802.1x client authentication
    Voice VLAN

    Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Auto voice capabilities deliver network-wide zero touch deployment of voice endpoints and call control devices.

    Multicast TV VLANMulticast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR).Q-in-Q

    VLANs transparently cross over a service provider network while isolating traffic among customers.

    GVRP/GARP

    Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain.

    Unidirectional Link Detection (UDLD)UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or port faults to prevent forwarding loops and blackholing of traffic in switched networks.DHCP Relay at Layer 2Relay of DHCP traffic to DHCP server in a different VLAN. Works with DHCP Option 82.IGMP (versions 1, 2, and 3) snoopingInternet Group Management Protocol (IGMP) limits bandwidth-intensive multicast traffic to only the requesters; supports 4K multicast groups (source-specific multicasting is also supported).IGMP querierIGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router.HOL blockingHead-of-line (HOL) blocking.IPv4 routingWirespeed routing of IPv4 packets
    Up to 128 static routes and up to 128 IP interfacesWirespeed IPv6 Static RoutingUp to 4K static routes and up to 200 IPv6 interfacesLayer 3 interfaceConfiguration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interfaceCIDRSupport for Classless Inter-Domain RoutingVRRPVirtual Router Redundancy Protocol (VRRP) delivers improved availability in a Layer 3 network by providing redundancy of the default gateway servicing hosts on the network. VRRP versions 2 and 3 are supported. Up to 255 virtual routers are supported.DHCP serverSwitch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
    Support for DHCP optionsDHCP Relay at Layer 3Relay of DHCP traffic across IP domains.User Datagram Protocol (UDP) RelayRelay of broadcast information across Layer 3 domains for application discovery or relaying of BOOTP/DHCP packets.Hardware stackUp to 4 units in a stack. Up to 208 ports managed as a single system with hardware failoverHigh availabilityFast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack.Plug-and-play stacking configuration/management
    • Master/backup for resilient stack control
    • Autonumbering
    • Hot swap of units in stack
    • Ring and chain stacking options, autostacking port speed, flexible stacking port options
    High-speed stack interconnectsCost-effective high-speed 10G fiber and copper interfaces. Support LAG as stacking interconnects for even higher bandwidth.SSHSecure Shell (SSH) Protocol secures Telnet traffic to and from the switch. SSH versions 1 and 2 are supported.SSLSecure Sockets Layer (SSL) encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch.IEEE 802.1X (Authenticator role)
    • RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions.
    • Supports time-based 802.1X dynamic VLAN assignment.
    Web-based authenticationWeb-based authentication provides network admission control through web browser to any host devices and operating systems.STP BPDU GuardA security mechanism to protect the networks from invalid configurations. A port enabled for Bridge Protocol Data Unit (BPDU) Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops.STP Root GuardThis prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes.DHCP snoopingFilters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as a DHCP server.IP Source Guard (IPSG)When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing.Dynamic ARP Inspection (DAI)The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination address in the ARP packet. This prevents man-in-the-middle attacks.IP/MAC/Port Binding (IPMB)The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DoS attacks in the network, thereby increasing network availability.Secure Core Technology (SCT)Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received.Secure Sensitive Data (SSD)A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user.Private VLANPrivate VLAN provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic; supports multiple uplinks.Port securityAbility to lock source MAC addresses to ports and limit the number of learned MAC addresses.RADIUS/TACACS+Supports RADIUS and TACACS authentication. Switch functions as a client.RADIUS accountingThe RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session.Storm controlBroadcast, multicast, and unknown unicast.DoS preventionDenial-of-service (DoS) attack prevention.Multiple user privilege levels in CLILevels 1, 7, and 15 privilege levels.ACLs
    • Support for up to 2K entries.
    • Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, DSCP/IP precedence, TCP/User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, TCP flag.
    • Time-based ACLs supported.
    Priority levels

    8 hardware queues

    SchedulingStrict Priority and weighted round-robin (WRR)Class of service
    • Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/ToS/DSCP based; DiffServ; classification and remarking ACLs, trusted QoS
    • Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
    Rate limitingIngress policer; egress shaping and ingress rate control; per VLAN, per port, and flow basedCongestion avoidanceA TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization.StandardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbit/s Ethernet over fiber for LAN, IEEE 802.3an 10GBase-T 10 Gbit/s Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 826, RFC 879, RFC 896, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3176, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330IPv6
    • IPv6 host mode IPv6 over Ethernet dual IPv6/IPv4 stack
    • IPv6 Neighbor and Router Discovery (ND), IPv6 Stateless Address Autoconfiguration, path MTU Discovery
    • Duplicate Address Detection (DAD) ICMPv6
    • IPv6 over IPv4 network with ISATAP tunnel support
    • USGv6 and IPv6 Gold Logo certified
    IPv6 QoSPrioritize IPv6 packets in hardwareIPv6 ACLDrop or Rate Limit IPv6 packets in hardwareIPv6 First Hop Security
    • RA guard
    • ND inspection
    • DHCPv6 guard
    • Neighbor binding table (snooping and static entries)
    • Neighbor binding integrity check
    Multicast Listener Discovery (MLD v1/2) snoopingDeliver IPv6 multicast packets only to the required receiversIPv6 applicationsWeb/SSL, Telnet Server/SSH, Ping, Traceroute, SNTP, TFTP, SNMP, RADIUS, Syslog, DNS client, DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, TACACSIPv6 RFC supportedRFC 4443 (which obsoletes RFC 2463) - ICMPv6
    RFC 4291 (which obsoletes RFC 3513) - IPv6 Address Architecture
    RFC 4291 - IP Version 6 Addressing Architecture
    RFC 2460 - IPv6 Specification
    RFC 4861 (which obsoletes RFC 2461) - Neighbor Discovery for IPv6
    RFC 4862 (which obsoletes RFC 2462) - IPv6 Stateless Address Auto-configuration
    RFC 1981 - Path MTU Discovery
    RFC 4007 - IPv6 Scoped Address Architecture
    RFC 3484 - Default address selection mechanism
    RFC 5214 (which obsoletes RFC 4214) - ISATAP tunneling
    RFC 4293 - MIB IPv6: Textual Conventions and General Group
    RFC 3595 - Textual Conventions for IPv6 Flow LabelWeb user interfaceBuilt-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search.SNMPSNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-based Security Model (USM)Standard MIBslldp-MIB
    lldpextdot1-MIB
    lldpextdot3-MIB
    lldpextmed-MIB
    rfc2674-MIB
    rfc2575-MIB
    rfc2573-MIB
    rfc2233-MIB
    rfc2013-MIB
    rfc2012-MIB
    rfc2011-MIB
    RFC-1212
    RFC-1215
    SNMPv2-CONF
    SNMPv2-TC
    p-bridge-MIB
    q-bridge-MIB
    rfc1389-MIB
    rfc1493-MIB
    rfc1611-MIB
    rfc1612-MIB
    rfc1850-MIB
    rfc1907-MIB
    rfc2571-MIB
    rfc2572-MIB
    rfc2574-MIB
    rfc2576-MIB
    rfc2613-MIBrfc2665-MIB
    rfc2668-MIB
    rfc2737-MIB
    rfc3621-MIB
    rfc4668-MIB
    rfc4670-MIB
    trunk-MIB
    tunnel-MIB
    udp-MIB
    draft-ietf-bridge-8021x-MIB
    draft-ietf-bridge-rstpmib-04-MIB
    draft-ietf-hubmib-etherif-mib-v3-00-MIB
    ianaaddrfamnumbers-MIB
    ianaifty-MIB
    ianaprot-MIB
    inet-address-MIB
    ip-forward-MIB
    ip-MIB
    RFC1155-SMI
    RFC1213-MIB
    SNMPv2-MIB
    SNMPv2-SMI
    SNMPv2-TM
    RMON-MIB
    rfc1724-MIB
    dcb-raj-DCBX-MIB-1108-MIB
    rfc1213-MIB
    rfc1757-MIBPrivate MIBsCISCOSB-lldp-MIB
    CISCOSB-brgmulticast-MIB
    CISCOSB-bridgemibobjects-MIB
    CISCOSB-bonjour-MIB
    CISCOSB-dhcpcl-MIB
    CISCOSB-MIB
    CISCOSB-wrandomtaildrop-MIB
    CISCOSB-traceroute-MIB
    CISCOSB-telnet-MIB
    CISCOSB-stormctrl-MIB
    CISCOSBssh-MIB
    CISCOSB-socket-MIB
    CISCOSB-sntp-MIB
    CISCOSB-smon-MIB
    CISCOSB-phy-MIB
    CISCOSB-multisessionterminal-MIB
    CISCOSB-mri-MIB
    CISCOSB-jumboframes-MIB
    CISCOSB-gvrp-MIB
    CISCOSB-endofmib-MIB
    CISCOSB-dot1x-MIB
    CISCOSB-deviceparams-MIB
    CISCOSB-cli-MIB
    CISCOSB-cdb-MIB
    CISCOSB-brgmacswitch-MIB
    CISCOSB-3sw2swtables-MIB
    CISCOSB-smartPorts-MIB
    CISCOSB-tbi-MIB
    CISCOSB-macbaseprio-MIB
    CISCOSB-env_mib-MIB
    CISCOSB-policy-MIB
    CISCOSB-sensor-MIB
    CISCOSB-aaa-MIB
    CISCOSB-application-MIB
    CISCOSB-bridgesecurity-MIB
    CISCOSB-copy-MIB
    CISCOSB-CpuCounters-MIB
    CISCOSB-Custom1BonjourService-MIB
    CISCOSB-dhcp-MIB
    CISCOSB-dlf-MIB
    CISCOSB-dnscl-MIB
    CISCOSB-embweb-MIB
    CISCOSB-fft-MIB
    CISCOSB-file-MIB
    CISCOSB-greeneth-MIB
    CISCOSB-interfaces-MIB
    CISCOSB-interfaces_recovery-MIB
    CISCOSB-ip-MIBCISCOSB-iprouter-MIB
    CISCOSB-ipv6-MIB
    CISCOSB-mnginf-MIB
    CISCOSB-lcli-MIB
    CISCOSB localization-MIB
    CISCOSB-mcmngr-MIB
    CISCOSB-mng-MIB
    CISCOSB-physdescription-MIB
    CISCOSB-PoE-MIB
    CISCOSB-protectedport-MIB
    CISCOSB-rmon-MIB
    CISCOSB-rs232-MIB
    CISCOSB-SecuritySuite-MIB
    CISCOSB-snmp-MIB
    CISCOSB-specialbpdu-MIB
    CISCOSB-banner-MIB
    CISCOSB-syslog-MIB
    CISCOSB-TcpSession-MIB
    CISCOSB-traps-MIB
    CISCOSB-trunk-MIB
    CISCOSB-tuning-MIB
    CISCOSB-tunnel-MIB
    CISCOSB-udp-MIB
    CISCOSB-vlan-MIB
    CISCOSB-ipstdacl-MIB
    CISCOSB-eee-MIB
    CISCOSB-ssl-MIB
    CISCOSB-digitalkeymanage-MIB
    CISCOSB-qosclimib-MIB
    CISCOSB-vrrp-MIB
    CISCOSB-tbp-MIB
    CISCOSB-stack-MIB
    CISCOSMB-MIB
    CISCOSB-secsd-MIB
    CISCOSB-draft-ietf-entmib-sensor-MIB
    CISCOSB-draft-ietf-syslog-device-MIB
    CISCOSB-rfc2925-MIB
    CISCOSB-vrrpv3-MIB
    CISCO-SMI-MIB
    CISCOSB-DebugCapabilities-MIB
    CISCOSB-CDP-MIB
    CISCOSB-vlanVoice-MIB
    CISCOSB-EVENTS-MIB
    CISCOSB-sysmng-MIB
    CISCOSB-sct-MIB
    CISCO-TC-MIB
    CISCO-VTP-MIB
    CISCO-CDP-MIBRMONEmbedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysisIPv4 and IPv6 Dual StackCoexistence of both protocol stacks to ease migrationFirmware upgrade
    • Web browser upgrade (HTTP/HTTPS) and TFTP and SCP
    • Upgrade can be initiated through console port as well
    • Dual images for resilient firmware upgrades
    Port mirroringTraffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port.VLAN mirroringTraffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can be mirrored to one destination port.Flow-based redirection and mirroringRedirect or mirror traffic to a destination port or mirroring session based on flow.Remote switch port analyzer (RSPAN)Traffic can be mirrored across Layer 2 domain to a remote port on a different switch for easier troubleshooting.sFlow agentSwitch can export sFlow sample to external collectors. sFlow provides visibility into network traffic down to flow level.DHCP (Options 12, 66, 67, 82, 129, and 150)DHCP options facilitate tighter control from a central point (DHCP Server), to obtain IP address, auto configuration (with configuration file download), DHCP Relay, and host name.Auto configuration with Secure Copy (SCP) file downloadEnables secure mass deployment with protection of sensitive data.Text-editable configsConfig files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment.SmartportsSimplified configuration of QoS and security capabilities.Auto SmartportsAutomatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero touch deployments.Secure Copy (SCP)Securely transfer files to and from the switch.Textview CLIScriptable CLI. A full CLI as well as a menu CLI is supported.Cloud ServicesSupport for Cisco Active AdvisorLocalizationLocalization of GUI and documentation into multiple languages.Login bannerConfigurable login banners for web as well as CLI.Time-based port operationLink up or down based on user-defined schedule (when the port is administratively up).Other managementTraceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; Simple Network Time Protocol (SNTP); Xmodem upgrade; cable diagnostics; Ping; syslog; Telnet client (SSH secure support); Automatic time settings from Management Station.Energy DetectAutomatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link is up.Cable length detectionAdjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables.EEE compliant (802.3az)Supports IEEE 802.3az on all Gigabit copper ports.Disable port LEDsLEDs can be manually turned off to save on energy.Jumbo framesFrame sizes up to 9K bytes. The default MTU is 2K.MAC table64K addresses.BonjourThe switch advertises itself using the Bonjour protocol.LLDP (802.1ab) with LLDP-MED extensionsLink Layer Discovery Protocol (LLDP) allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones.Cisco Discovery Protocol (CDP)The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics using Cisco Discovery Protocol.The following switches support 802.3at PoE+, 802.3af PoE, and Cisco pre-standard (legacy) PoE on any of the RJ45 network ports. 60W PoE is also supported on selected RJ-45 network ports
    Maximum power of 60W is delivered to any of the 60W PoE ports, and maximum power of 30W is delivered to any of the other RJ45 network ports, until the PoE budget for the switch is reached
    The total power available for PoE per switch is as follows ModelPower Dedicated to PoENumber of Ports That Support PoESG350X-8PMD 240W8 (4 support 60W PoE)SG350X-24P195W 24 (4 support 60W PoE)SG350X-24MP382W 24 (4 support 60W PoE)SG350X-24PD 375W 24 (4 support 60W PoE)SG350X-48P382W 48 (8 support 60W PoE)SG350X-48MP740W 24 (8 support 60W PoE)Model NameGreen Power (mode)System Power ConsumptionPower Consumption (with PoE)Heat Dissipation (BTU/hr)SG350X-8PMDEEE, Energy Detect, Short Reach110V=32.5W
    220V=32.5WN/A1065.3 SG350X-24EEE, Energy Detect, Short Reach110V=32.5W
    220V=32.5WN/A83.39 SG350X-24PEEE, Energy Detect, Short Reach110V=48.8W
    220V=49.3W110V=269.2W
    220V=260.1W764.18 SG350X-24MP EEE, Energy Detect, Short Reach110V=53.8W
    220V=54.8W110V=471.2W
    220V=460.4W1,607.80 SG350X-24PD EEE, Energy Detect, Short Reach110V=48.8W
    220V=49.3W110V=269.2W
    220V=260.1W 1625.3 SG350X-48EEE, Energy Detect, Short Reach110V=52.0W
    220V=51.8WN/A177.43SG350X-48PEEE, Energy Detect, Short Reach110V=76.3W
    220V=76.9W110V=494.3W
    220V=483.1W1,686.62SG350X-48MP EEE, Energy Detect, Short Reach110V=84.3W
    220V=84.6W110V=893.1W
    220V=878.0W3,047.38SG350XG-2F10EEE, Energy Detect, Short Reach110V=84.3W
    220V=84.6WN/A 288.67 SG350XG-24FEEE, Energy Detect, Short Reach110V=76.6W
    220V=77.5WN/A 264.44 SG350XG-24TEEE, Energy Detect, Short Reach110V=143.9W
    220V=142.9WN/A 491.01SG350XG-48TEEE, Energy Detect, Short Reach110V=264.4W
    220V=255.8WN/A 902.17SX350X-08EEE, Energy Detect, Short Reach 110V=50.3W
    220V=50.3W N/A171.63SX350X-12 EEE, Energy Detect, Short Reach 110V=63.9W
    220V=64.1WN/A202.27SX350X-24FEEE, Energy Detect, Short Reach 110V=38.5W
    220V=39.0WN/A133.07SX350X-24 EEE, Energy Detect, Short Reach 110V=121.1W
    220V=124.5W N/A404.13 SX350XG-52EEE, Energy Detect, Short Reach 110V=234.4W
    220V=229.2WN/A917.18Model NameTotal System PortsNetwork PortsUplink PortsSG350X-8PMD8 2.5GE + 2 10GE8 2.5GE2 10GE copper/SFP+ comboSG350X-2424 GE + 4 10GE24 GE2 10GE copper/SFP+ combo + 2 SFP+SG350X-24P24 GE + 4 10GE24 GE2 10GE copper/SFP+ combo + 2 SFP+SG350X-24MP 24 GE + 4 10GE24 GE2 10GE copper/SFP+ combo + 2 SFP+SG350X-24PD 20 GE + 4 1G/2.5GE + 4 10GE20 GE + 4 1G/2.5G2 10GE copper/SFP+ combo + 2 SFP+SG350X-4848 GE + 4 10GE48 GE2 10GE copper/SFP+ combo + 2 SFP+SG350X-48P48 GE + 4 10GE48 GE2 10GE copper/SFP+ combo + 2 SFP+SG350X-48MP 48 GE + 4 10GE48 GE2 10GE copper/SFP+ combo + 2 SFP+SG350XG-2F1010 10G copper + 2 10G SFP+ plus 1 GE OOB management10 10GE 2 10GE SFP+ (dedicated)SG350XG-24F22 10G SFP+ slots + 2 combo 10G copper/SFP+ plus 1 GE OOB management22 10GE SFP+2 10GE copper/SFP+ comboSG350XG-24T22 10G SFP+ slots + 2 combo 10G copper/SFP+ plus 1 GE OOB management22 10GE2 10GE copper/SFP+ comboSG350XG-48T46 10G copper + 2 combo 10G copper/SFP+ plus 1 GE OOB management46 10GE2 10GE copper/SFP+ comboSX350X-086 10G copper + 2 10G SFP+ plus 1 GE OOB management6 10GE2 10GE copper/SFP+ comboSX350X-12 10 10G copper + 2 10G SFP+ plus 1 GE OOB management10 10GE 2 10GE copper/SFP+ comboSX350X-24F20 10G SFP+ slots + 4 combo 10G copper/SFP+ plus 1 GE OOB management20 10GE SFP+4 10GE Copper/SFP+ Combo SX350X-24 20 10G copper + 4 combo 10G copper/SFP+ plus 1 GE OOB management20 10GE4 10GE Copper/SFP+ Combo SX350XG-5248 10G copper + 4 combo 10G copper/SFP+ plus 1 GE OOB management48 10GE4 10GE Copper/SFP+ Combo Console portCisco Standard RJ45 console portOOB management portDedicated Gigabit management port for out-of-band managementUSB slotUSB slot on the front panel of the switch for easy file and image managementButtonsReset buttonCabling typeUnshielded twisted pair (UTP) Category 6e or better; fiber options (SMF and MMF); coaxial SFP+LEDsSystem, master, stack ID, link/speed per portFlash256 MBCPU800 MHz (dual-core) ARMCPU memory512 MBPackage Contents
    • Cisco Small Business 350X Series Stackable Managed Switch
    • Power cord
    • Mounting kit included with all models
    • Serial cable
    • Quick Start Guide
    Minimum Requirements
    • Web browser: Mozilla Firefox version 8 or later; Microsoft Internet Explorer version 7 or later, Safari, Chrome
    • Category 6a Ethernet network cable for 10 Gig speeds at up to 100m
    • TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed
    All numbers are aggregate across all ports, as the buffers are dynamically shared:Model NamePacket BufferSG350X-8PMD12 MB SG350X-241.5 MB SG350X-24P1.5 MB SG350X-24MP 1.5 MB SG350X-24PD 24 MB SG350X-483 MB SG350X-48P3 MB SG350X-48MP 3 MB SG350XG-2F102 MB SG350XG-24F2 MB SG350XG-24T2 MB SG350XG-48T4 MB SX350X-083 MB SX350X-123 MB SX350X-24F3 MB SX350X-243 MB SX350X-5210 MB SKUMediaSpeedMaximum DistanceMGBSX1Multimode fiber1000 Mbps500 kmMGBLH1Single-mode fiber1000 Mbps40 kmMGBT1UTP cat 5e1000 Mbps100 mSFP-H10GB-CU1MCopper coax10 Gig1 mSFP-H10GB-CU3MCopper coax10 Gig3 mSFP-H10GB-CU5MCopper coax10 Gig5 mSFP-10G-SRMultimode fiber10 Gig26 m - 400 mSFP-10G-LRSingle-mode fiber10 Gig10 kmSFP-10G-SR-SMultimode fiber10 Gig26 m - 400 mSFP-10G-LR-SSingle-mode fiber10 Gig10 kmPower100 - 240V 47 - 63 Hz, internal, universalCertificationUL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class AOperating temperature32° to 122°F (0° to 50°C)Storage temperature-4° to 158°F (-20° to 70°C)Operating humidity10% to 90%, relative, noncondensingStorage humidity10% to 90%, relative, noncondensingUnit Dimensions (W x H x D)SG350X-8PMD 344.4 x 44 x 252.5 mm (13.6 x 1.45 x 9.94 in) SG350X-24, SG350X-24PD, SG350X-48440 x 44 x 257 mm (17.3 x 1.45 x 10.12 in)SG350X-24P, SG350X-24MP, SG350X-48P, SG350XG-2F10, SG350XG-24F, SX350X-24F, SX350X-24 440 x 44 x 350 mm (17.3 x 1.45 x 13.78 in)SG350X-48MP, SG350XG-24T, SG350XG-48T, SX350X-52440 x 44 x 450 mm (17.3 x 1.45 x 17.72 in)SX350X-12440 x 44 x 203 mm (17.3 x 1.6 x 8.0 in)Unit weightSG350X-8PMD2.74 kg (6.04 lb)SG350X-244.32 kg (9.52 lb) SG350X-24P4.93 kg (10.41 lb) SG350X-24MP 5.69 kg (11.75 lb)SG350X-24PD 3.99 kg (8.79 lb)SG350X-483.73 kg (8.22 lb)SG350X-48P5.82 kg (12.83 lb)SG350X-48MP 6.69 kg (14.75 lb)SG350XG-2F104.03 kg (8.88 lb)SG350XG-24F4.16 kg (9.17 lb)SG350XG-24T5.57 kg (12.28 lb)SG350XG-48T7.43 kg (16.38 lb)SX350X-082.98 kg (6.57 lb) SX350X-122.93 kg (6.46 lb)SX350X-24F4.4 kg (9.7 lb) SX350X-245.1 kg (11.2 lb) SX350X-527.29 kg (16.1 lb)Model NameFan (Number)Acoustic NoiseMTBF at 50°C (Hours)SG350X-8PMD142.9 at 45°C 474,265SG350X-2410°C - 30°C: 36.3dB
    50°C: 49.3dB385,289 SG350X-24P20°C - 30°C: 41.0dB
    50°C: 52.9dB244,654SG350X-24MP 20°C - 30°C: 43.3dB
    50°C: 52.3dB 144,617 SG350X-24PD 345.1 at 45°C426,741SG350X-4810°C - 30°C: 35.0dB
    50°C: 51.7dB248,842 SG350X-48P30°C - 30°C: 43.8dB
    50°C: 52.1dB164,614SG350X-48MP 40°C - 30°C: 43.2dB
    50°C: 53.2dB171,530SG350XG-2F1030°C - 30°C: 38.9dB
    50°C: 49.7dB291,863SG350XG-24F40°C - 30°C: 36.4dB194,544SG350XG-24T40°C - 30°C: 40.7dB
    50°C: 51.7dB347,052SG350XG-48T40°C - 30°C: 47.7dB
    50°C: 58.9dB131,767SX350X-0830°C - 30°C: 38.9dB
    50°C: 49.7dB1,418,411SX350X-1230°C - 30°C: 38.9dB
    50°C: 49.7dB633,325SX350X-24F40°C - 25°C: 36.4dB1,356,179 SX350X-2440°C–30°C: 40.7dB
    50°C: 51.7dB556,643SX350X-5240°C–30°C: 47.7dB
    50°C: 58.9dB287,136WarrantyLimited lifetime with next-business-day advance replacement (where available, otherwise same day ship)
    Sours: https://www.secureitstore.com/SG350XG-24T.asp
    1. Sesame street seal
    2. Nissan seattle washington
    3. Okc street outlaws
    4. Guitar basic chords pdf

    Cisco SX550X-12F 12-Port 10G SFP+ Stackable Managed Switch

    • Data Sheets and Product Information

    • Security Notices

    • Release and Compatibility

      • Release Notes

        • Open Source Document for Cisco_250_350_350X_and_550X_Series_Switches_2.5.5_x 03-Jun-2020(PDF - 1 MB)
        • Open Source Used In 250, 350, 350X, and 550X Series Switches 2.4.5.x 28-Nov-2018(PDF - 1 MB)
        • Open Source Used In Cisco 350XG and 550XG Series Switches Firmware Version 2.0.0.x 26-Oct-2015(PDF - 882 KB)
        • Open Source Used In Cisco 250, 350, 350X and 550X Series Switches 2.4.0.x. 03-Jul-2018(PDF - 933 KB)
        • Open Source Used In Cisco 250, 350, 350X and 550X Series Switches Firmware Version 2.3.0.x 28-Jun-2017(PDF - 994 KB)
        • Open Source Used In Cisco Sx10G Series Switches 1.4.9.x 07-Nov-2018(PDF - 808 KB)
        • Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/ 550XG, SX350X, SX550X Series Switches up to Software Version 2.5.8.12 03-Sep-2021(PDF - 331 KB)
        • Release Notes for SF250, SG250, SF350, SG350/350X/350XG, SF550X, SG550X/ 550XG, SX350X, SX550X Series Switches up to Software Version 2.5.7.85 05-Mar-2021(PDF - 313 KB)
    • Reference

    • Design

    • Install and Upgrade

    • Configuration

  • Maintain and Operate

  • Troubleshooting

    • Troubleshooting TechNotes

      • Administrator Password Recovery for 300, 350, 500 and 550 Series Switches 11-Dec-2018
      • Cannot Add a New Switch to an Existing Stack 28-Sep-2020
      • Diagnose Link Flapping on a Switch 03-May-2021
      • How to Copper Test a Port on a Switch 15-Jan-2018
      • Smartport Best Practices for Sx250, Sx350, SG350X, and Sx550X Series Switches 01-Mar-2021
      • Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports 12-Dec-2018
      • Troubleshoot Smartports on your Sx250, Sx350, SG350X, or Sx550X Series Switch 28-Jan-2021
  • Literature

  • Translated Documents

  • Sours: https://www.cisco.com/c/en/us/support/switches/sx550x-12f-12-port-10g-sfp-stackable-managed-switch/model.html
    Cisco Catalyst 1000 Review

    Affordable 10 Gigabit Ethernet for Small Businesses

     

    Here are some basic facts about 10 Gigabit Ethernet and how you can migrate your network to 10 Gigabit within your budget.

    Why do I need a 10G network?

    Modern businesses have become increasingly digital, which means that everything from sales and marketing to service and support, rely on a fast and reliable network. There has never been so much traffic and applications running on the networks and it will only keep growing. Technologies like 802.11ac wireless, server virtualization, IP convergence, Cloud and Internet of things greatly improve productivity, but also apply even more pressure to your network.

    A network that simply “works” is no longer enough. It has to support business growth in an ever-changing digital world, too. With a 10G network core, you can avoid network congestion at busy times, improve the productivity of employees, shorten the response time to customers and bring new products to the market faster.

    How much does it cost?

    There are three components involved in an upgrade to 10G network: 

    • 10G core switches

    • Access switches with 10G uplinks, and 

    • 10G network interface cards for servers and storage devices

    Ten years ago, a single 10G switch port would cost you $4,000. But today, the cost has dropped to as low as $100 per port. Cisco 550X and 350X series switches are specifically designed for small businesses, providing a wide range of choices of 8, 12, 16, 24 and 48 10G ports, starting from only $1,000 street price. You can even get it lower if you shop around. 

    For access switches with 10G uplink, the Cisco 550X, 350X and 250X series provides 24 or 48 gigabit ports with 4 10G uplinks, starting from around $600 street price.

    A 10G network interface card (NIC) on server or storage devices costs between $100 - $300 depending on the brand. You can get it lower if you order it as an option to your new servers.

    What else do I need to know about 10G?

    It’s simple. Especially with 10GBase-T supported on Cisco 550X and 350X series switches, you use the same familiar RJ45 network cable to connect the 10G switch with your servers, storages and other switches, and they go up to the same 100 meters as in the Gigabit network. Just make sure you pick up a Cat6A grade RJ45 network cable, available in most IT shops. 10GBase-T is becoming more popular in network switches and servers because of its lower cost and ease of use. So, if you haven’t got any 10G devices, you should get those with 10GBase-T ports. 

    Cisco 550X and 350X series switches also support 10G SFP+. You should use these ports if you have existing devices that come with 10G SFP+ ports or you need a 10G connection to other switches that are more than 100 meters away. These look exactly the same as SFP ports on your Gigabit switches, but they’re now running at 10 Gigabit. For server or NAS with 10G SFP+ ports, the most cost-efficient way to connect is to use 10G direct attach cables. These are basically copper cables with a SFP+ connector on both sides, and they come in pre-cut lengths of 1m, 3m and 5m.

    For switches that are more than 100 meters away, you will need a pair of SFP+ modules and the matching fiber cable between them. Depending on the length required, you can use multi-mode SFP+ and fiber to reach 400 meters and single mode SFP+ and fiber to reach 10 km. 

    How can I ensure a smooth migration?

    You don’t need to upgrade your whole network in one go. Start with the core switches that you use to connect all your access switches together and connect your servers and NAS. Think about how many ports you need and if redundancy is a concern for you. Having two core switches stacked together to provide redundancy and extra performance is a good design for a solid network foundation.

    Once you have your core switches upgraded to 10G, you can migrate your key access switches and servers to 10G and connect to your new core switches first. You will see immediate performance gain in the most critical parts of your network. The rest of the network can stay as is for the moment, because 10GBase-T ports are backwards-compatible with Gigabit links, and 10G SFP+ cages can also work with 1G SFP modules.

    You can upgrade the rest of your network to 10G whenever you’re ready—or in multiple phases if you wish. 

    Bottom line: The technology is not complicated, and with Cisco 550X and 350X series switches, it’s no longer out of reach for Small and Mid-size Businesses. The technology enables you to migrate your network to 10G in multiple steps, so you can spend your money wisely, where it’s needed most.

    Sours: https://www.cisco.com/c/en/us/solutions/small-business/resource-center/networking/affordable-10-gigabit-ethernet-for-small-businesses.html

    Cisco 10g switch

    Get free Cisco Catalyst 9100 Wi-Fi 6 access points when you purchase qualifying Cisco Catalyst 9000 multigigabit switches with our Cisco DNA software licenses.

    Catalyst 9400 Series SwitchesCatalyst 9400 Series Switches
    • Modular
    • 1/2.5/5/10/40 Gbps, Multigigabit, 10/100/1000BASE-T
    • 9-Tbps/chassis switching capacity
    • DNA Center, SD-Access, E-LLW

    This is the next generation of modular Gigabit and Multigigabit Ethernet switches. The series provides enterprise-class Layer 2 and 3 switching, is designed for DNA Center and SD-Access management and automation, and includes an Enhanced Limited Lifetime Warranty (E-LLW).

    Nexus 7700 SwitchesNexus 7700 Switches
    • Modular data center
    • 1/10/40/100 G port types
    • 5- to 83-Tbps switching capacity
    • NS-OX, ACI
    Catalyst 4500-X Series SwitchesCatalyst 4500-X Series Switches
    • Fixed
    • 1/10 Gbps port types
    • 800-Gbps switching capacity
    • High-availability features
    • LLW

    Looking for a cost-effective, small, fixed aggregation switch? The Cisco Catalyst 4500-X Series offers the size, scalability, and enhanced security you need. And its high-availability features reduce downtime.

    MDS 9706 Multilayer DirectorMDS 9706 Multilayer Director
    • Modular storage
    • 10/40 G FCoE
    • 2 to 32 Gbps autosensing FC port types
    • 6 Tbps Fibre Channel switching
    • MDS NX-OS

    The Cisco MDS 9706 Multilayer Director brings superior performance, scalability, multiprotocol convergence, integrated analytics, and enterprise-grade availability to data center SANs in a compact form factor. It is an ideal candidate for deployment in small to medium-sized data center storage environments as well as pod-based converged solutions for the cloud.

    Catalyst 2960-L Series SwitchesCatalyst 2960-L Series Switches
    • Fixed
    • 1 Gbps, 10/100/1000BASE-T
    • PoE, PoE+
    • Fanless design
    • E-LLW

    These entry-level, noiseless Gigabit Ethernet switches provide enterprise-class Layer 2 switching with basic security, quality of service (QoS), Power over Ethernet Plus (PoE+), and management simplicity. They include an Enhanced Limited Lifetime Warranty (E-LLW).

    Catalyst 6880-X Series SwitchesCatalyst 6880-X Series Switches
    • Fixed
    • 1/10 Gbps port types
    • 2-Tbps switching capacity
    • DNA/SD-Access ready, LW

    These switches form the enterprise backbone of the digital organization. The Catalyst 6880-X Series are powerful, fixed campus-backbone switches optimized for scale, security, simplicity, and Multigigabit Ethernet.

    Catalyst Digital Building Series SwitchesCatalyst Digital Building Series Switches
    • Fixed
    • 10/100BASE-T
    • 30/60W power/port
    • Fixed power supply
    • Fanless design
    • E-LLW

    Catalyst Digital Building switches enhance flexibility, safety, and productivity and allow you to save on energy costs. These plenum-rated, UPOE, fanless switches are designed for smart buildings and are optimized for low-voltage PoE.

    Nexus 7700 Series SwitchesNexus 7700 Series Switches
    • Modular data center
    • 1/10/40/100 Gbps port types
    • 5- to 83-Tbps switching capacity
    • NS-OX, ACI
    • DNA/SD-Access ready

    The modular Cisco Nexus 7000 and 7700 switches deliver a comprehensive Cisco NX-OS feature set and open-source programmable tools for software-defined networking (SDN) deployments. They offer high-density 10, 40, and 100 Gigabit Ethernet with application awareness and performance analytics.

    MDS 9710 Multilayer DirectorMDS 9710 Multilayer Director
    • Modular storage
    • 10/40 G FCoE
    • 2 to 32 Gbps autosensing FC port types
    • 12 Tbps Fibre Channel switching
    • MDS NX-OS

    The MDS 9710 brings superior performance, scalability, multiprotocol convergence, integrated analytics, and enterprise-grade availability to data center SANs. With it, you can deploy Fibre Channel, FICno, FCIP, FCoE, and NVMe over Fibre Channel on a single fabric. This director meets the stringent requirements of large virtualized storage envirnoments.

    Catalyst 9500 Series SwitchesCatalyst 9500 Series Switches
    • Fixed, StackWise virtual
    • 100/40/10/1 Gbps port types
    • 6.4-Tbps switching capacity
    • DNA Center, SD-Access, E-LLW

    The Catalyst 9500 Series is the first 100- and 40-Gbps enterprise campus switch purpose built for security, the Internet of Things (IoT), and the cloud. These fixed-core switches are a building block for Software-Defined Access.

    Nexus 9500 Series SwitchesNexus 9500 Series Switches
    • Modular
    • 1/10/25/40/50/100 G port types
    • 60 Tbps switching capacity
    • NX-OS, ACI

    Improve performance and efficiency with the Cisco Nexus 9516 Switch. It provides high density 1/10/40 GE in a compact 21-rack-unit modular chassis. This versatile modular switch is designed for high-density, end-of-row, and high-performance aggregation-layer deployments in both traditional and Cisco Application Centric Infrastructure (ACI) – enabled data centers.

    Catalyst 3560-CX Series SwitchesCatalyst 3560-CX Series Switches
    • Fixed
    • 1 Gbps, Multigigabit ports
    • 32- to 92-Gbps switching capacity
    • PoE+ up to 240W
    • E-LLW

    When you need a small, powerful switch, the Catalyst 3560-CX is ideal. Extend enterprise-class services to wherever you want, far from the wiring closet. It’s easy to configure, quiet, and fits where you need it, like in flexible workspaces, hospital rooms, shops, and classrooms.

    Catalyst 6800 Series SwitchesCatalyst 6800 Series Switches
    • Modular and fixed
    • 1/10 Gbps port types
    • 11.4-Tbps switching capacity
    • DNA/SD-Access ready, LW

    Get the scale, security, and simplicity you need to meet your business challenges. Catalyst 6800 Series switches are powerful campus backbone switches optimized for Multigigabit Ethernet services to help you protect your network investment.

    Catalyst 2960-CX Series SwitchesCatalyst 2960-CX Series Switches
    • Fixed
    • 1 Gbps
    • PoE+ support with up to 124W of PoE budget
    • Fanless design
    • E-LLW

    Deployed outside the wiring closet, these switches deliver Layer 2 Gigabit Ethernet access with advanced security (IEEE 802.1x), quality of service (QoS), Power over Ethernet Plus (PoE+), Cisco Catalyst SmartOperations, and energy management.They include an Enhanced Limited Lifetime Warranty (E-LLW).

    Catalyst 9300 Series SwitchesCatalyst 9300 Series Switches
    • Fixed, StackWise
    • 1/2.5/5/10/25/40 Gbps, Multigigabit, 10/100/1000BASE-T
    • 480-Gbps switching capacity
    • Cisco DNA Center, SD-Access, E-LLW

    This is the next generation of fixed, stackable Gigabit and Multigigabit Ethernet switches. The series provides enterprise-class Layer 2 and 3 switching. They are designed for Cisco DNA Center and SD-Access management and automation and include an Enhanced Limited Lifetime Warranty (E-LLW).

    MDS 9250i Multiservice Fabric SwitchMDS 9250i Multiservice Fabric Switch
    • Fixed fabric switch
    • 2 to 16 Gbps autosensing FC port types
    • 740 Gbps Fibre Channel switching
    • MDS NX-OS

    The MDS 9250i is an optimized platform for deploying high-performance SAN extension solutions, distributed intelligent fabric services, and cost-effective multiprotocol connectivity for both open systems and mainframe environments. With a compact form factor and advanced capabilities normally available only on director-class switches, it is an ideal solution for departmental and remote branch-office SANs, as well as in large-scale SANs in conjunction with the Cisco MDS 9710 Multilayer Director.

    Catalyst 4500 Series SwitchesCatalyst 4500 Series Switches
    • Modular
    • 1/10/40 Gbps port types
    • 928 Gbps/chassis
    • PoE, PoE+, UPOE
    • Cisco DNA/SD-Access ready, LLW

    The Catalyst 4500E Series is Cisco SD-Access-ready, and it’s the industry's most widely deployed modular platform for campus access and distribution deployments. Now with Supervisor 9-E, 8-E, and 8L-E, these switches offer 928 Gbps of wired and wireless converged access per system. 

    Catalyst 2960-X Series SwitchesCatalyst 2960-X Series Switches
    • Fixed, stackable
    • 10/100BASE-T
    • 100- to 216-Gbps switching capacity
    • PoE, PoE+
    • E-LLW

    Get the enterprise-class features you want at a great price. Our 2960-X Series are stackable Gigabit Ethernet Layer 2 and Layer 3 access switches. They’re easy to deploy, manage, and troubleshoot. They offer automated software installation and port configuration.

    Nexus 5600 Series SwitchesNexus 5600 Series Switches
    • Fixed data center
    • 1/10 G, 10/40 G FCoE port types
    • 1.4- to 7.7-Tbps switching capacity
    • NS-OX, ACI

    Excellent for small to medium-size network deployments, Nexus 5600 switches offer ease of convergence with unified Fibre Channel and FC over Ethernet (FCoE) ports. They high-performance and high-density Layer 2 and 3 in a compact form factor, with low latency, unified fabric automation, flexible buffer management, and support for Virtual Extensible LAN (VXLAN).

    Nexus 9200 Series SwitchesNexus 9200 Series Switches
    • Fixed data center
    • 1/10/25/40/50/100 G port types
    • 3.2- to 7.2-Tbps switching capacity
    • NS-OX, ACI

    Excellent for small to medium-size network deployments, Nexus 9200 switches offer 1/10/40/100-Gbps Layer 2 and 3, low latency, and exceptional power efficiency. They're fully programmable, with Cisco NX-API, and operable in Cisco ACI mode.

    Nexus 9300 Series SwitchesNexus 9300 Series Switches
    • Modular
    • 1/10/25/40/100 G port types
    • 1.44 to 2.56 Tbps switching capacity
    • NX-OS, ACI

    The Cisco Nexus 9300 Series Switches include both modular and fixed-port switches that are designed to overcome the challenges with a flexible, agile, low-cost, application-centric infrastructure. Applications have been transitioning over time to a less monolithic, scale-out, multinode model. IT infrastructure that supports this model must scale with the speed of business and support both 10, 25, 40, 50, 100 Gigabit Ethernet connectivity.

    Catalyst 6500 Series SwitchesCatalyst 6500 Series Switches
    • Modular
    • 1/10 Gbps port types
    • 360-Tbps switching capacity
    • DNA/SD-Access ready, LW

    Get resiliency, security, and more. Catalyst 6500 Series Switches are widely deployed campus backbone switches. They are optimized for Multigigabit Ethernet services to help you protect your network investment.

    Catalyst 3850 Series SwitchesCatalyst 3850 Series Switches
    • Fixed, StackWise
    • 1 /10/40 Gbps port types
    • 240- to 480-Gbps switching capacity
    • PoE, PoE+, StackPower, UPOE
    • Cisco DNA/SD-Access Ready, E-LLW

    Get an access switch that gets you ready for 802.11ac Wave 2 and other technologies that are here today or coming at you tomorrow. Stackable Catalyst 3850 Series Multigigabit and 10-Gbps network switches give you wired and wireless together, so you can scale up and protect your investments.

    Catalyst 3650 Series SwitchesCatalyst 3650 Series Switches
    • Fixed, StackWise
    • 1/10/40 Gbps port types
    • 160-Gbps switching capacity
    • PoE, PoE+, UPOE
    • Cisco DNA/SD-Access ready, E-LLW

    The Catalyst 3750 Series are energy-efficient, Layer 3 Fast Ethernet stackable switches. These switches support Cisco EnergyWise technology, which helps you manage the power consumption of your network and reduce energy costs and carbon footprint.

    Catalyst 4500-X Series SwitchesCatalyst 4500-X Series Switches
    • Fixed
    • 1/10 Gbps port types
    • 800-Gbps switching capacity
    • High-availability features
    • LLW

    Looking for a cost-effective, small, fixed aggregation switch? The Cisco Catalyst 4500-X Series offers the size, scalability, and enhanced security you need. And its high-availability features reduce downtime.

    MDS 9396T 32G Multilayer Fabric SwitchMDS 9396T 32G Multilayer Fabric Switch
    • Fixed fabric
    • 4 to 32 Gbps autosensing FC port types
    • 3 Tbps Fibre Channel switching
    • MDS NX-OS

    The next-generation Cisco MDS 9396T 32-Gbps 96-Port 2-rack unit Fibre Channel Switch provides high-speed Fibre Channel connectivity in the SAN. This switch offers state-of-art analytics and telemetry capability built into its next-generation Application-Specific Integrated Circuit (ASIC) platform. The Non-Volatile Memory express (NVMe)-ready switch allows seamless transition to Fibre Channel Non-Volatile Memory Express

    Meraki MS250 Series SwitchesMeraki MS250 Series Switches
    • Modular
    • Physical Stacking
    • Virtual Stacking
    • 1G, 10G port types
    • PoE, PoE+
    • Configure with Meraki dashboard

    Cisco Meraki MS250 series switches provide reliable access switching ideal for deploying in branches and small campuses. With stacking capabilities and 10G SFP+ uplinks on every model, redundancy and performance are guaranteed. This family also supports redundant, field-replaceable power supplies for mission critical networks.

    MDS 9148T 32G Multilayer Fabric SwitchMDS 9148T 32G Multilayer Fabric Switch
    • Fixed fabric
    • 4 to 32 Gbps autosensing FC port types
    • 1.5 Tbps Fibre Channel switching
    • MDS NX-OS

    The next-generation Cisco MDS 9148T 32-Gbps 48-Port Fibre Channel Switch provides high-speed Fibre Channel connectivity for All-Flash arrays. This switch offers state-of-the-art analytics and telemetry capability built into its next-generation Application-Specific Integrated Circuit (ASIC) platform. This switch allows seamless transition to Fibre Channel Non-Volatile Memory Express (FC-NVMe) workloads whenever available without any hardware upgrade in the SAN. It empowers small, midsize, and large enterprises that are rapidly deploying cloud-scale applications using extremely dense virtualized servers, providing the benefits of greater bandwidth, scale, and consolidation. Some of the main benefits for a small-scale Storage Area Network (SAN) are automatic zoning, nonblocking forwarding, and smaller port groups of 16 ports

    Meraki MS425 Series SwitchesMeraki MS425 Series Switches
    • Modular
    • Physical Stacking
    • Virtual Stacking
    • 10G, 40G port types
    • Configure with Meraki dashboard

    Cisco Meraki MS400 series brings powerful cloud-managed switching to the aggregation layer. This range of 1 and 10Gbps fiber aggregation switches adopts the benefits of the cloud: simplified management, reduced complexity, network wide visibility and control, and lower cost for campus deployments.

    Meraki MS120-8 Series SwitchesMeraki MS120-8 Series Switches
    • Fixed
    • Virtual Stacking
    • Compact
    • 1G port type
    • PoE, PoE+
    • Configure with Meraki dashboard

    Cisco Meraki MS120-8 compact switches provide Layer 2 access switching in a fanless, compact form factor. All models include 1Gb SFP uplinks, integrated mounting brackets, and a Kensington security slot, making them ideal for rapid and secure deployment to branch location.

    Meraki MS210 Series SwitchesMeraki MS210 Series Switches
    • Fixed
    • Physical Stacking
    • Virtual Stacking
    • 1G port type
    • PoE, PoE+
    • Configure with Meraki dashboard

    Cisco Meraki MS210 switches provide Layer 2 access switching for branch and small campus locations. The MS210 includes 4 x 1G SFP uplinks and physically stacks with the MS225 to gain access to its 10G uplink. This family also supports an optional, rack-mountable PSU (Cisco RPS-2300) for power redundancy requirements.

    Catalyst 9500 Series SwitchesCatalyst 9500 Series Switches
    • Fixed, StackWise virtual
    • 100/40/10/1 Gbps port types
    • 6.4-Tbps switching capacity
    • Cisco DNA Center, SD-Access, E-LLW

    The Catalyst 9500 Series is the first 100- and 40-Gbps enterprise campus switch purpose built for security, the Internet of Things (IoT), and the cloud. These fixed-core switches are a building block for Software-Defined Access.

    Meraki MS120 Series SwitchesMeraki MS120 Series Switches
    • Fixed
    • Virtual Stacking
    • 1G port type
    • PoE, PoE+
    • Configure with Meraki dashboard

    Cisco Meraki MS120 switches provide Layer 2 access switching ideal for branch and campus deployments. The MS120 series features a variety of power options designed to meet the diverse needs of large enterprise networks.

    MDS 9718 Multilayer DirectorMDS 9718 Multilayer Director
    • Modular storage
    • 10/40 G FCoE
    • 2 to 32Gbps autosensing FC port types
    • 18 Tbps Fibre Channel switching
    • MDS NX-OS

    Gain superior performance, scalability, multiprotocol convergence, and enterprise-grade availability in your data center SAN. Our newest director offers the industry’s highest port density with 768 line-rate 32Gbps Fibre Channel ports and NVMe over Fibre Channel support. The MDS 9718 meets the stringent requirements of large virtualized storage environments.

    Catalyst 6800 Series SwitchesCatalyst 6800 Series Switches
    • Modular and fixed
    • 1/10 Gbps port types
    • 11.4-Tbps switching capacity
    • Cisco DNA/SD-Access ready, LW

    Get the scale, security, and simplicity you need to meet your business challenges. Catalyst 6800 Series switches are powerful campus backbone switches optimized for Multigigabit Ethernet services to help you protect your network investment.

    MDS 9132T 32G Multilayer Fabric SwitchMDS 9132T 32G Multilayer Fabric Switch
    • Fixed fabric switch
    • 4 to 32 Gbps autosensing FC port types
    • 1 Tbps Fibre Channel switching
    • MDS NX-OS

    The next-generation Cisco® MDS 9132T 32-Gbps 32-Port Fibre Channel Switch provides high-speed Fibre Channel connectivity from the server rack to the SAN core. It empowers small, midsize, and large enterprises that are rapidly deploying cloud-scale applications using extremely dense virtualized servers, providing the dual benefits of greater bandwidth and consolidation. Small-scale SAN architectures can be built from the foundation using this low-cost, low-power, non-blocking, line-rate, and low-latency, bi-directional airflow capable, fixed standalone SAN switch connecting both storage and host ports. Medium-size to large-scale SAN architectures built with SAN core directors can expand 32-Gbps connectivity to the server rack using these switches either in switch mode or Network Port Virtualization (NPV) mode. Additionally, investing in this switch for the lower-speed (4- or 8- or 16-Gbps) server rack gives you the option to upgrade to 32-Gbps server connectivity in the future using the 32-Gbps Host Bus Adapter (HBA) that are available today. The Cisco® MDS 9132T 32-Gbps 32-Port Fibre Channel switch also provides unmatched flexibility through a unique port expansion module that provides a robust cost-effective, field swappable, port upgrade option. This switch also offers state-of-art analytics and telemetry capability built into its next generation ASIC platform. The telemetry data extracted from the IO flows and computed on the switch integrated hardware, can be analyzed on-board or streamed to any Analytics visualization tool using industry leading data gRPC format, via the dedicated 10/100/1000BASE-T telemetry port.

    Meraki MS350-24X SwitchMeraki MS350-24X Switch
    • Modular
    • Physical Stacking
    • Virtual Stacking
    • 100M/1/2.5/5/10G port types
    • Multigigabit
    • PoE, PoE+, UPoE
    • Configure with Meraki dashboard

    Cisco Meraki MS350-24X provides reliable and high bandwidth access switching ideal for deploying in campus networks. With high speed stacking capabilities and 10G SFP+ uplinks built in on every model, redundancy and performance are guaranteed.

    Catalyst 6880-X Series SwitchesCatalyst 6880-X Series Switches
    • Fixed
    • 1/10 Gbps port types
    • 2-Tbps switching capacity
    • Cisco DNA/SD-Access ready, LW

    These switches form the enterprise backbone of the digital organization. The Catalyst 6880-X Series are powerful, fixed campus-backbone switches optimized for scale, security, simplicity, and Multigigabit Ethernet.

    Nexus 9500 R-Series SwitchesNexus 9500 R-Series Switches
    • Modular
    • 1/10/25/40/50/100 G port types
    • 60 Tbps switching capacity
    • NX-OS only

    The Cisco Nexus 9500 R-Series is a high-speed, high-density 1, 10, 25, 40, 50, and 100 Gigabit Ethernet modular switch designed for use as a data center aggregation or spine switch. It is capable of providing up to 9.6 Terabits per second (Tbps) capacity per slot for a total of 76.8Tbps capacity in the 8-slot chassis and 38.4Tbps in the 4-slot chassis. The Cisco Nexus 9500 R-Series line cards are high density 100, 50, 40, 25,10 and 1 Gigabit Ethernet cards with deep buffers and large table sizes. These line cards can also support 10 Gigabit Ethernet speeds using the breakout capability. The combination of these features – high port density, deep buffers, and large tables – make this switch an ideal choice for DMZ, big data, or edge routing applications.

    Catalyst 6500 Series SwitchesCatalyst 6500 Series Switches
    • Modular
    • 1/10 Gbps port types
    • 360-Tbps switching capacity
    • Cisco DNA/SD-Access ready, LW

    Get resiliency, security, and more. Catalyst 6500 Series Switches are widely deployed campus backbone switches. They are optimized for Multigigabit Ethernet services to help you protect your network investment.

    Meraki MS350 Series SwitchesMeraki MS350 Series Switches
    • Modular
    • Physical Stacking
    • Virtual Stacking
    • 1G, 10G port types
    • PoE, PoE+
    • Configure with Meraki dashboard

    Cisco Meraki MS350 series switches provide reliable and high bandwidth access switching ideal for deploying in campus networks. With high speed stacking capabilities and 10G SFP+ uplinks built in on every model, redundancy and performance are guaranteed. This family also supports options for multigigabit, UPoE, redundant, field-replaceable power supplies for mission critical networks.

    Catalyst 9400 Series SwitchesCatalyst 9400 Series Switches
    • Modular
    • 1/2.5/5/10/40 Gbps, Multigigabit, 10/100/1000BASE-T
    • 9-Tbps/chassis switching capacity
    • Cisco DNA Center, SD-Access, E-LLW

    This is the next generation of modular Gigabit and Multigigabit Ethernet switches. The series provides enterprise-class Layer 2 and 3 switching, is designed for Cisco DNA Center and SD-Access management and automation, and includes an Enhanced Limited Lifetime Warranty (E-LLW).

    Meraki MS410 Series SwitchesMeraki MS410 Series Switches
    • Modular
    • Physical Stacking
    • Virtual Stacking
    • 1G, 10G port types
    • Configure with Meraki dashboard

    Cisco Meraki MS400 series brings powerful cloud-managed switching to the aggregation layer. This range of 1 and 10Gbps fiber aggregation switches adopts the benefits of the cloud: simplified management, reduced complexity, network wide visibility and control, and lower cost for campus deployments.

    Meraki MS225 Series SwitchesMeraki MS225 Series Switches
    • Fixed
    • Physical Stacking
    • Virtual Stacking
    • 1G, 10G port types
    • PoE, PoE+
    • Configure with Meraki dashboard

    Cisco Meraki MS225 series switches provide layer 2 access switching and are ideal for deploying to branch locations. With stacking capabilities and 10G SFP+ uplinks on every model, performance is guaranteed. This family also supports an optional, rack-mountable remote PSU (Cisco RPS-2300) for power redundancy requirements.

    Catalyst 9200 Series SwitchesCatalyst 9200 Series Switches
    • Fixed, StackWise
    • 1/10, 10/100/1000BASE-T
    • 160-Gbps switching capacity
    • Cisco DNA Center, SD-Access, E-LLW

    This is the next generation of fixed, stackable Gigabit Ethernet switches designed for simple branch and mid-market. The series provides enterprise-class Layer 2 and 3 switching. They are designed for 3-click WebUI or Cisco DNA Center and SD-Access management and automation and include an Enhanced Limited Lifetime Warranty (E-LLW).

    Meraki MS355 Series SwitchesMeraki MS355 Series Switches
    • Modular
    • Physical Stacking
    • Virtual Stacking
    • 100M/1/2.5/5/10G port types
    • Multigigabit
    • PoE, PoE+, UPoE
    • Configure with Meraki dashboard

    Cisco Meraki MS355 Series

    Catalyst 9600 Series SwitchesCatalyst 9600 Series Switches
    • Modular, StackWise virtual
    • 100/40/10/1 Gbps port types
    • 25.6-Tbps switching capacity
    • Cisco DNA Center, SD-Access, E-LLW

    The Catalyst 9600 Series is the first modular 100 and 40 Gbps enterprise campus switch purpose built for security, the Internet of Things (IoT), and the cloud. These modular-core switches are a building block for Software-Defined Access.

    What are your access connectivity needs?

    • Fiber Ethernet
    • Gigabit Ethernet
    • Digital Building

    MultiGigabit Ethernet 10G uplinks

    What type of switch do you prefer?

    Configuration Professional

    Catalyst 6500

    • Catalyst 6500
    • Nexus 2200
    • Nexus 2300
    • Nexus 5000
    • Nexus 5500
    • Nexus 5600
    • Nexus 6000
    • Nexus 9200
    • Nexus 7000

    Are you purchasing a new switch or upgrading an old one?

    • New switch
    • Upgrade switch

    MultiGigabit Ethernet 40G uplinks

    What are your copper downlink needs

    • Multigigabit Ethernet
    • 10 GE
    • 5 GE
    • 2.5 GE
    • 1 GE

    Cisco DNA Center/SD-Access

    Are you purchasing a new switch or upgrading an old one?

    • New switch
    • Upgrade switch

    What are your uplink needs

    • 40 G (QSFP+)
    • 25 G (SFP28)
    • 10 G (SFP+)
    • 1 G (SFP)

    Cisco DNA Center/SD-Access

    What are your design requirements?

    • Converged LAN and SAN
    • ACI ready

    MultiGigabit Ethernet 40G uplinks

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • Configuration Professional
    • IOS CLI

    Gigabit Ethernet 2.5G uplinks

    What type of switch do you prefer?

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • IOS CLI

    What type of switch do you prefer?

    Do you need a switch or a fabric extender?

    Which SAN switch are you upgrading?

    • MDS 9120
    • MDS 9124
    • MDS 9134
    • MDS 9140
    • MDS 9148
    • MDS 9148S
    • MDS 9396S
    • MDS 92116/9216A
    • MDS 9216i
    • MDS 9222i
    • MDS 9509
    • MDS 9506
    • MDS 9513

    Configuration Professional

    What type of Aggregation/Spine switch do you prefer?

    What's the purpose of the new switch?

    What type of switch do you prefer?

    Configuration Professional

    Cisco DNA Center/SD-Access

    What functions are needed from the switch?

    Cisco DNA Center/SD-Access

    What type of switch do you prefer?

    What are your connectivity needs?

    What are your connectivity needs?

    Where will you deploy the new switch?

    What functions are needed from the switch?

    Which Cisco switch are you upgrading?

    • MDS 9020
    • MDS 9120
    • MDS 9124
    • MDS 9134
    • MDS 9140
    • MDS 9148
    • MDS 92116/9216A
    • MDS 9216i
    • MDS 9222i
    • MDS 9509

    Gigabit Ethernet 5G uplinks

    What's the purpose of the new switch?

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • Configuration Professional
    • IOS CLI

    What type of switch are you looking for?

    What type of switch do you prefer?

    Gigabit Ethernet 40G uplinks

    Configuration Professional

    What type of switch do you prefer?

    What are your copper downlink needs

    • Multigigabit Ethernet
    • 10 GE
    • 5 GE
    • 2.5 GE
    • 1 GE

    What are your design requirements?

    • Converged LAN and SAN
    • ACI ready

    What are your uplink needs

    • 40 G (QSFP+)
    • 25 G (SFP28)
    • 10 G (SFP+)
    • 1 G (SFP)

    Gigabit Ethernet 2.5G uplinks

    Gigabit Ethernet 5G uplinks

    Configuration Professional

    What are your design requirements?

    • Converged LAN and SAN
    • ACI ready

    What are your design requirements?

    • Converged LAN and SAN
    • ACI ready

    MultiGigabit Ethernet 10G uplinks

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • Configuration Professional
    • IOS CLI

    What type of Access/Leaf switch do you prefer?

    What are your design requirements?

    • Converged LAN and SAN
    • ACI ready

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • Configuration Professional
    • IOS CLI

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • IOS CLI

    What type of switch do you prefer?

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • Configuration Professional
    • IOS CLI

    Which Cisco switch are you upgrading?

    • Catalyst 6500 non-E
    • Nexus 2148T
    • Nexus 2232
    • Nexus 2248T
    • Nexus 5010
    • Nexus 5020
    • Nexus 5548P
    • Nexus 6004
    • Nexus 7000 w/Sup1

    Are you purchasing a new switch or upgrading an old one?

    • New switch
    • Upgrade switch

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • Configuration Professional
    • WebUI
    • IOS CLI

    Cisco DNA Center/SD-Access

    Cisco DNA Center/SD-Access

    What are your connectivity needs?

    • High Density - 100 Gbps QSFP28
    • Medium Density - 40 Gbps QSFP+
    • Lower Density - 25 Gbps SFP28
    • Low Density 1/10 Gbps SFP/SFP+

    What type of switch do you prefer?

    Cisco DNA Center/SD-Access

    What are your design requirements?

    • Converged LAN and SAN
    • ACI ready

    Gigabit Ethernet 40G uplinks

    What type of switch do you prefer?

    Which Cisco switch are you upgrading?

    • Catalyst 6500
    • Catalyst 4500-X
    • Catalyst 4500-E
    • Catalyst 3850
    • Catalyst 3750
    • Other

    What's the purpose of the new switch?

    • Access
    • Core
    • SAN extension

    What type of switch do you prefer?

    How would you like to manage the switch?

    • Cisco DNA Center
    • Meraki Dashboard
    • IOS CLI

    What's the purpose of the new switch?

    • Access/Leaf
    • Aggregation/spine
    • Core

    Which Cisco switch are you upgrading?

    • Catalyst 2900XL
    • Catalyst 2948-G
    • Catalyst 2950
    • Catalyst 2960-C
    • Catalyst 2970
    • Catalyst 2960-L
    • Catalyst 2960-X
    • Catalyst 2900-CX
    • Catalyst 3500XL
    • Catalyst 3560
    • Catalyst 3650
    • Catalyst 3750
    • Catalyst 3850
    • Catalyst 4500-E
    • Catalyst 4500-X
    • Catalyst 6500
    • Other

    Which Cisco switch are you upgrading?

    • Catalyst 6500
    • Nexus 2200
    • Nexus 2300
    • Nexus 5000
    • Nexus 5500
    • Nexus 5600
    • Nexus 6000
    • Nexus 9200
    • Nexus 7000

    What type of switch do you prefer?

    Do you need a switch or a fabric extender?

    Are you purchasing a new switch or upgrading an old one?

    • New switch
    • Upgrade switch

    What are your access connectivity needs?

    • Fiber Ethernet
    • Gigabit Ethernet
    • Digital Building

    What are your connectivity needs?

    • Fibre Channel over IP
    • Native Fibre Channel

    What's the purpose of the new switch?

    What type of switch do you prefer?

    Cisco DNA Center/SD-Access

    What type of switch do you prefer?

    Configuration Professional

    What type of switch do you prefer?

    How would you like to manage the switch?

    You prefer ACI, NX-OS or FEX

    Cisco DNA Center/SD-Access

    Sours: https://www.cisco.com/c/en/us/products/switches/switch-selector.html
    Cisco Catalyst 1000 Review

    Cisco Catalyst 4928 10 Gigabit Ethernet Switch

    The Cisco Catalyst 4928-10 Gigabit Ethernet Switch is designed to provide high-performance wire-speed, Layer 2-4 services for branch Gigabit Ethernet fiber LAN aggregation deployments where space constraints require a small form factor solution.

    The Cisco Catalyst 4928-10GE Switch offers 28 ports of wire-speed fiber Gigabit Ethernet ports (SFP) and two wire-speed 10 Gigabit Ethernet (X2 optics). Optional internal AC or DC, 1 + 1, hot-swappable power supplies, and a hot-swappable fan tray with redundant fans to ensure high reliability and serviceability.

    Highlights:

    • Industry-leading wire-speed performance of 48 Gbps, and 71 million packets per second
    • Low latency with Layer 2-4 switching
    • Innovative security and QoS features
    • Gigabit Ethernet or 10 Gigabit Ethernet uplinks
    • Optional internal AC or DC 1+1 hot-swappable power supplies
    • Hot-swappable fan tray with redundant fans

    Additional Resources

    Sours: https://www.cisco.com/c/en/us/products/switches/catalyst-4928-10-gigabit-ethernet-switch/index.html

    Now discussing:

    .



    550 551 552 553 554