Oem subaru subwoofer

Oem subaru subwoofer DEFAULT

Subwoofer Base Limiter
Subaru Part No.: H630SFJ400

Genuine Subaru Accessories H630SFJ400, the Right Choice

Your vehicle deserves only genuine OEM Subaru parts and accessories. To ensure reliability, purchase Subaru part # H630SFJ400 Subwoofer Base Limiter. It is sometimes referred to as Subaru Subwoofer/Amplifier. Our Subaru parts and accessories are expedited directly from authorized Subaru dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Subaru parts are the best for restoring your vehicle to factory condition performance. This part fits 2015-2018 Subaru BRZ, 2015-2016 Subaru Impreza, 2015-2020 Subaru WRX, 2015 Subaru XV Crosstrek.

Affordable, reliable and built to last, Subaru part # H630SFJ400 Subwoofer Base Limiter stands out as the smart option. SubaruPartsDeal.com is your prime online source with the biggest and best selection of genuine Subaru parts and accessories at giant discounted prices. We have the OEM Subaru parts and accessories you need at the wholesale prices. SubaruPartsDeal.com has you covered no matter what type of Subaru vehicle you drive.

Sours: https://www.subarupartsdeal.com/parts/subaru-accessories_subwoofer_bass_limiter-h630sfj400.html
Subaru Legacy Forum IndexSubaru Legacy Forum Index
07-20-2021, 08:13 PM

OEM Subwoofer Advice

 
Title: New Member
iTrader:(0)
Send a private message to CookietimeFind all posts by Cookietime

I own a Subaru Legacy 2004 B4 Sedan that had a OEM mcintosh stereo & subwoofer. The previous owner had installed an aftermarket stereo and bypass the mcintosh AMP and rewired the speakers to the stereo head unit. however, he left the macintosh subwoofer out.

would it be possible to use the OEM subwoofer on my aftermarket head unit - happy to buy an aftermarket amp. or is possible to replace the OEM subwoofer & amp but utilizing the same space as the OEM subwoofer? think they call air subwoofers (without the box)? unfortunately, boot space is kinda important to me.

much appreciate anyone's help in advance.

Sours: https://legacygt.com/forums/
  1. La usurpadora capitulo 67
  2. Whack my ipad
  3. Nj sdi
  4. Cleaning cash jobs

Member

 

Join Date: Oct 2016

Drives: 2017 BRZ Limited

Location: USA

Posts: 20

Thanks: 0

Thanked 22 Times in 7 Posts

Mentioned: 1 Post(s)

Tagged: 0 Thread(s)

Subaru accessory subwoofer


I just installed the OEM subwoofer from Subaru into my 2017 BRZ. I thought I would take a minute to share my thoughts.

I was honestly pretty disappointed in the sound of the stock sound system. To the point where I was not going to be happy listening to it. I knew that I was going to have to do something, but was unsure what. My decision was made easier once I received a $500 coupon from Subaru to spend on parts or service (different story), so without having to risk much "out-of-pocket" money, I got the OEM subwoofer (cost after coupon was $34).

The parts/service department wanted $440 to install it though. They said it was a 3.5 hour job. Again, since there wasn't a whole lot of information about this sub out there, and I wasn't sure what I believed anyway, I really wasn't interested in spending that kind of money without knowing I would be happy. So, I had them order it, and figured I would try to install it myself even though I was quite intimidated about doing so.

So I picked up the sub yesterday. I thought it was somewhat ironic that the cardboard box it came in wouldn't fit in the car, and thus had to ride shotgun just to get it home. This morning I set out to install the thing.

Installation was pretty straightforward. I had to grab the installation instructions online (from here) since they were not included in the box. The instructions are quite detailed and have pictures for each step. I did have, and would definitely recommend having, a set of nylon trim tools, but other than that, a 10mm wrench and a screwdriver (a short one too) are all that is required. Installation took me approximately 4 hours or so including several breaks. It is something that I think pretty much anyone could do.

Now to the important stuff... the sound. Night and day. Simple as that. Is it the best sounding system I have ever heard? Not by a longshot, but it is sooooo much better than it was. One of the reviews I had read about this system spoke about the crossovers and how just having the stock speakers no longer trying to output the bass, cleans up the sound all around. I couldn't agree more. I mean the stock speakers are still not fantastic speakers, but the crossovers help a lot.

The overall sound is now much more balanced than it was. One of the things I was reading in reviews is how the bass is overwhelming with the addition of the sub. I can certainly see where someone could think that. However, another review mentioned that the sub is associated with the front speakers, so fading to the rear speakers quiets it down some. This is true. I moved the fader 2 notches to the rear, and that helps. I also messed with the EQ some to adjust the sound to my liking, but leaving it flat actually sounds really good. Based on some reviews I have read, I was halfway expecting to have to fade the sound almost all the way to the rear and EQ all the bass out, but that is just not the way it is. I think that with minimal tweaking, one could adjust the sound to their liking with ease.

Based on the research I did, it seemed like there are basically three options for someone interested in upgrading the sound. The OEM subwoofer, the OEM+ kit, and full-on custom. I have heard plenty of full-on custom systems, and if you do it right, and spend the right money, it will probably be the best sounding of the options. That was not what I was interested in doing. That left the two "kits" for me to choose between.

Since I haven't heard the OEM+ system, I couldn't comment on the difference between that system and what the system sounds like with the addition of the OEM subwoofer. I would speculate that the OEM+ system sounds much better. I really don't see how it couldn't since it replaces all the stock speakers. That said, it is also twice as expensive. The choice between the two systems would have been more difficult for me had I not had the coupon from Subaru, and to be honest, I still contemplated going the OEM+ route anyway.

All in all, I'm glad I got the sub that I did. It gave the stock system exactly what it needed to make it a decent system. Mind blowingly amazing? No. It would be hard to say that it was even great (although I could see some saying it is). But I would say that it is good. Certainly better than acceptable, and also enough to where I'm done with it now. I have no more desire to upgrade. This will do just fine.

I hope that maybe this information helps someone make a decision that I know I was torn with. If anyone has questions, I'm happy to try to answer them.

Almost forgot... for reference, I listen to all sorts of different genres. Mostly jazz and jazz fusion, but I was also listening to pop, rock, metal, and classical today. It all sounded good.

Sours: https://www.ft86club.com/forums/showthread.php?t=114572
Subaru Impreza WRX STI - OEM Audio Plus System Installation \u0026 Review

Error! - Please enable Javascript

Error! - Please enable Javascript

Error! - Please enable Javascript

2021 Ascent with Navigation

The 2021 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Ascent with Navigation

The 2020 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Ascent with Navigation

The 2019 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Ascent with Navigation

The 2018 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Ascent with Navigation

The 2017 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Ascent with Navigation

The 2016 Ascent with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2021 BRZ with Navigation

The 2021 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 BRZ with Navigation

The 2020 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 BRZ with Navigation

The 2019 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 BRZ with Navigation

The 2018 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 BRZ with Navigation

The 2017 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 BRZ with Navigation

The 2016 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 BRZ with Navigation

The 2015 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2014 BRZ with Navigation

The 2014 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2013 BRZ with Navigation

The 2013 BRZ with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

Invalid Model Year - Please Contact Us for more details

2021 WRX with Navigation

The 2021 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 WRX with Navigation

The 2020 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 WRX with Navigation

The 2019 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 WRX with Navigation

The 2018 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 WRX with Navigation

The 2017 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 WRX with Navigation

The 2016 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 WRX with Navigation

The 2015 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 WRX with Navigation

The 2014 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 WRX with Navigation

The 2013 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2012 WRX with Navigation

The 2012 WRX with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2021 Forester with Navigation

The 2021 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 Forester with Navigation

The 2020 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 Forester with Navigation

The 2019 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 Forester with Navigation

The 2018 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 Forester with Navigation

The 2017 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 Forester with Navigation

The 2016 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 Forester with Navigation

The 2015 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Forester with Navigation

The 2014 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 Forester with Navigation

The 2013 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2012 Forester with Navigation

The 2012 Forester with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2021 Impreza/Crosstrek with Navigation

The 2021 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 Impreza/Crosstrek with Navigation

The 2020 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 Impreza/Crosstrek with Navigation

The 2019 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 Impreza/Crosstrek with Navigation

The 2018 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 Impreza/Crosstrek with Navigation

The 2017 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 Impreza/Crosstrek with Navigation

The 2016 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 Impreza/Crosstrek with Navigation

The 2015 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Impreza/Crosstrek with Navigation

The 2014 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 Impreza/Crosstrek with Navigation

The 2013 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2012 Impreza/Crosstrek with Navigation

The 2012 Impreza/Crosstrek with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2021 Legacy/Outback with Navigation

The 2021 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Legacy/Outback with Navigation

The 2020 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Legacy/Outback with Navigation

The 2019 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Legacy/Outback with Navigation

The 2018 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Legacy/Outback with Navigation

The 2017 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Legacy/Outback with Navigation

The 2016 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Legacy/Outback with Navigation

The 2015 Legacy/Outback with Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Legacy/Outback with Navigation

The 2014 Legacy/Outback with Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 Legacy/Outback with Navigation

The 2013 Legacy/Outback with Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 Legacy/Outback with Navigation

The 2012 Legacy/Outback with Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 BRZ without Navigation

The 2021 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2020 BRZ without Navigation

The 2020 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2019 BRZ without Navigation

The 2019 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2018 BRZ without Navigation

The 2018 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2017 BRZ without Navigation

The 2017 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2016 BRZ without Navigation

The 2016 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2015 BRZ without Navigation

The 2015 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 BRZ without Navigation

The 2014 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2013 BRZ without Navigation

The 2013 BRZ without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

Invalid Model Year - Please Contact Us for more details

2021 WRX without Navigation

The 2021 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 WRX without Navigation

The 2020 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 WRX without Navigation

The 2019 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 WRX without Navigation

The 2018 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 WRX without Navigation

The 2017 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 WRX without Navigation

The 2016 WRX without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 WRX without Navigation

The 2015 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2014 WRX without Navigation

The 2014 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 WRX without Navigation

The 2013 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 WRX without Navigation

The 2012 WRX without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 Forester without Navigation

The 2021 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Forester without Navigation

The 2020 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Forester without Navigation

The 2019 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Forester without Navigation

The 2018 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Forester without Navigation

The 2017 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Forester without Navigation

The 2016 Forester without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Forester without Navigation

The 2015 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2014 Forester without Navigation

The 2014 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 Forester without Navigation

The 2013 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 Forester without Navigation

The 2012 Forester without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 Impreza/Crosstrek without Navigation

The 2021 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Impreza/Crosstrek without Navigation

The 2020 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Impreza/Crosstrek without Navigation

The 2019 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Impreza/Crosstrek without Navigation

The 2018 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Impreza/Crosstrek without Navigation

The 2017 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Impreza/Crosstrek without Navigation

The 2016 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Impreza/Crosstrek without Navigation

The 2015 Impreza/Crosstrek without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Impreza/Crosstrek without Navigation

The 2014 Impreza/Crosstrek without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2013 Impreza/Crosstrek without Navigation

The 2013 Impreza/Crosstrek without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2012 Impreza/Crosstrek without Navigation

The 2012 Impreza/Crosstrek without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched, +12V unswitched and Ground
-Additional breakouts can be added for Amp Trigger signals or other signals upon request
-Full details page - CLICK HERE:

2021 Legacy/Outback without Navigation

The 2021 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2020 Legacy/Outback without Navigation

The 2020 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2019 Legacy/Outback without Navigation

The 2019 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2018 Legacy/Outback without Navigation

The 2018 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2017 Legacy/Outback without Navigation

The 2017 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

OEM Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Connector DiagramSubaru 10-pin connector

2016 Legacy/Outback without Navigation

The 2016 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Metra 71-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2015 Legacy/Outback without Navigation

The 2015 Legacy/Outback without Navigation will require the following jumper harnesses:
- 10-pin - This harness provides connections to the +12V, Ground, Illumination, and Front Speakers
- 6-pin - This harness provides connections to the Rear Speakers

Note about Harman Kardon vehicles: The Harman Kardon amplifier is responsible for some volume control and equalization functions so using this adapter will not work for connecting a subwoofer to the OEM headunit (on Harman Kardon vehicles). You will need to connect to output signals of the OEM amplifier rather than the headunit. If you don't have the Harman Kardon system, then this will not be an issue.

Price: $40

Reverse Metra 70-1761

Details:
-All pins will be populated in both harnesses
-Breakout connections will be provided for +12V switched and Ground
-Additional breakouts can be added upon request. Note that most OEM headunits do not have an amp trigger signal because it is not needed for most OEM applications. If your car doesn't have an OEM amplifier, we recommend using the +12V switched wire to trigger the amplifier as this will turn the amp on when the ignition is on.

Pinout:
Subaru Speaker PinoutSubaru 10-pin connector

2014 Legacy/Outback without Navigation

The 2014 Legacy/Outback without Navigation will require the following jumper harness:
- 20-pin - This harness provides connections to the +12V, Ground, Illumination, and Speakers

Price: $36

Lead Time: 1 day - Ships immediately

10-pin and 6-pin Jumper Harnesses

Details:
-All pins will be populated in both harnesses

Sours: https://www.autoharnesshouse.com/82191_info.html

Subwoofer oem subaru

Subaru Legacy, Baja OEM under-seat subwoofer with wiring harness and Kenwood H/U

SoldSee similar items£79.72Buy It Nowor Best Offer, £29.67 Shipping Estimate, Click to see shipping cost, eBay Money Back Guarantee

Seller:leonshel✉️(992)100%, Location:Manheim, Pennsylvania, Ships to: US & many other countries, Item:193973399374Subaru Legacy, Baja OEM under-seat subwoofer with wiring harness and Kenwood H/U. Subaru 2000-2004 Legacy Outback, 2003-2006 Baja OEM under-seat subwoofer with wiring harness and Kenwood H/U. Condition is "Used". TESTEDFor sale is an original/OEM Subaru under-seat subwoofer and Kenwood DPX300uCame from a 2000-2004 Legacy model, but could be used with any Subaru from 90s-00s that has the standard stereo plugThe original wiring harness is included, which connects as a pass-through for the factory stereo plug.The wiring is intended to run down under the center console and under the passenger seat.The bracket on the speaker attaches to the rear-right seat bolt of the front passenger seat.Shipped with USPS Priority Mail.Condition:Used, Returns Accepted:ReturnsNotAccepted, Manufacturer Part Number:H6300LS300, Brand:Subaru, Custom Bundle:No, Non-Domestic Product:No, Modified Item:No, Type:Subwoofer, Placement on Vehicle:Under Seat, Color:Black

PicClick Insights - Subaru Legacy, Baja OEM under-seat subwoofer with wiring harness and Kenwood H/U PicClick Exclusive

  •  Popularity - 794 views, 5.9 views per day, 135 days on eBay. Super high amount of views. 1 sold, 0 available.
  • 794 views, 5.9 views per day, 135 days on eBay. Super high amount of views. 1 sold, 0 available.

  •  Price -
  •  Seller - 992+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
  • 992+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

    Recent Feedback

People Also Loved PicClick Exclusive

Sours: https://picclick.co.uk/Subaru-Legacy-Baja-OEM-under-seat-subwoofer-with-wiring-193973399374.html
Subaru OEM 10\

.

You will also like:

.



930 931 932 933 934